This process is only for adding more devices after the initial setup. If this is the first device, use Activate Credit Card Support in HST (MP200/Vega3000).
Step 1: Connect the Wi-Fi
- Press the power button on the device to turn it on
- Once you see the Welcome screen, configure the Wi-Fi.
On the MP200: Hold down the Wi-Fi key (third key down on the far right) until it beeps twice.
On the Vega 3000 (V3): Hold down the 9 key until it beeps twice. - Review the list of available networks
- Select your network
- Enter your Wi-Fi password
- Once Wi-Fi is connected, you should be prompted to enter your pairing code
Step 2: Pair the terminal in HST
- Log into Central Office in HST
- Go to Admin > Schools
- Select the school from the list and click More Details
- Access the POS tab
- In the Terminals section, click the Edit button in the Credit Card Device Edit column next to the POS terminal you want to pair with the device.
- Check the box for Terminal Credit Card Support
- A 6-digit pairing code should appear on the screen
- Enter the pairing code on the device
- A message should appear on screen to let you know if the connection was successful
Tip: If you would like to turn off keypad sounds, go back to the Main Menu. Select 1 for Settings and then select 5 to change Keypad Sound to Off.
Step 3: Configure device settings in USAePay for remote updates
- Log into USAePay
- Go to Settings > Device Manager in the left sidebar
- The device you originally named Horizon should have changed to the actual terminal/lane name as it appears in your software.
- The power button in the corner should be green.
- Click to open details for the device
- Under Settings, check the box next to Update Notifications. This will push update notifications directly to the device and allow you to run updates from the device. Otherwise, you would need to monitor the Device Manager in USAePay for any software updates and initiate the updates from the website.
- Click Save