Equipment must be purchased through Persolvent to ensure compatibility with our card present integrations.
Key features:
- Part of the TETRA line of Ingenico devices
- WIFI connection*
- Internal printer
- Can be used as countertop or mobile
- Long life removable battery
- Color touch screen menus
- Supports swipe, EMV, and contactless payments
- Cloud based software that pushes updates to the terminal
*Although an Ethernet cradle is an optional accessory for this device, our accounts only support a WIFI connection.
Key functions:
- Press the green O button to turn on the device
- Press the yellow < button to clear
- Press the red X key to cancel and go back to the previous screen
- Press the yellow < button and the .,#* button at the same time to turn off the device
- Enter 0000 to see the Terminal Status
- Enter 0001 for the Admin Menu
- The white key with the black button is the F key
Settings configuration:
This device establishes a persistent outbound connection to USAePay. It does not need to be on the same network as the point of sale. If you have firewall rules on your network, you will need to whitelist eft://direct.paymentengine.io:9021 to establish a connection.
- Enter 0001 for the Admin screen
- Press 3 for Wi-Fi parameters
- 1-Disable Don't select this one. If you click on it, it disables WIFI. If you do end up disabling, it becomes 1-Enable that you can click to turn WIFI back on.
- 2-Scan Networks Use to select a new WIFI network to configure and connect
- 3-My Networks List of existing configured WIFI networks with one set as the default to always use first
- 4-Default IP configuration DHCP activation is On
- 5-Active Roaming 0-Off
- 6-Connection Type 2-Client
- 7-Bind interface 0.0.0.0
- 8-Ethernet Status Active
- 9-Server IP address direct.paymentengine.io
- 10-Port 9021
- 11-SSL Mode None
- 12-URL eft://direct.paymentengine.io:9021
We recommend not making any changes to the settings menu unless instructed to do so by our Support Team. The device is already configured to work with USAePay.
If you are instructed to make a change, follow these steps:
- Enter 0001 for the Admin screen
- Press 3 for Wi-Fi parameters
- Select the setting you need to change by entering the number or tapping the screen
- Make the necessary change
- Hit the red X button
- You will be asked if you want to Save and Reboot
- Select 1-Yes to continue or select 2-No to cancel the change
- When the device reboots, go back to the Admin menu to make sure the change was made