Follow these instructions to successfully connect your Lane terminal to the Device Manager in USAePay so you can process payments in the merchant console or via a third party integration.
Connect Ethernet
How to connect to Ethernet:
- Connect one end of an Ethernet cable to the back of the device
- Connect the other end of the cable to the wall
Add the device to USAePay
Create a source key:
- Log into USAePay
- Go to Settings > API Keys in the left sidebar
- Click Add API Key
- Name = create a source name (example - Lane 7000)
- PIN = create a unique alphanumeric PIN
- Click Save in the lower right corner
Register the device:
- Go to Settings > Device Manager in the left sidebar
- Click Add
- Device Name = create a source name (example - Lane 7000)
- Search for Source Kay = use the dropdown to select the key you just created
- Terminal Type = Direct
- Click Register
- A six-digit pairing code will display on the screen
Pairing
How to pair the device to the Device Manager:
- The screen on the device should say Please Enter ID Number
- Use the keys on the device to type in the six-digit pairing code from USAePay
- Click the green O button
- Once connected, you should see This Lane Closed
Configure settings in USAePay
How to review and change device options:
- Go back to the Device Manager in USAePay
- Click on the device to open the Device Options screen
- Make sure Enable EMV and Contactless are checked
- Uncheck Enable Debit MSR (you can accept debit cards, but pin debit is not supported)
- Check the box next to Update Notifications to receive alerts on the device when updates are available that you can run from the device. If unchecked, no notifications are sent. You will only see pending updates by accessing the Device Manager and you must login to send an update to the device.
- Click Save